Flymo Chainsaw HT45 User Manual

HT42/420 HT45/450  
HT51/510 HT60/600  
For all customer enquiries or for replacement parts, contact:-  
01325 300303  
 
2
General  
Preparation  
1. Always wear suitable clothing, gloves, and  
1. Never allow children or people unfamiliar  
with these instructions to use the  
Hedgetrimmer. Local regulations may  
restrict the age of the operator.  
2. Only use the Hedgetrimmer in the manner  
and for the functions described in these  
instructions.  
stout shoes. The use of safety glasses is rec-  
ommended. Do not wear loose clothing or  
jewellery which can be caught in moving parts.  
2. Thoroughly inspect the area where the  
Hedgetrimmer is to be used and remove all  
wires and other foreign objects.  
3. Never operate the Hedgetrimmer when you  
are tired, ill or under the influence of alcohol,  
drugs or medicine.  
3. Before using the machine and after any  
impact, check for signs of wear or damage  
and repair as necessary.  
4. The operator or user is responsible for acci-  
dents or hazards occurring to other people  
or their property.  
4. Never attempt to use an incomplete  
Hedgetrimmer or one with an unauthorised  
modification.  
Electrical  
1. The British Standards Institute recommend  
Use  
1. Use the Hedgetrimmer only in daylight or  
the use of a Residual Current Device (R.C.D.)  
with a tripping current of not more than 30mA. 2. Avoid operating your Hedgetrimmer on a  
good artificial light.  
Even with a R.C.D. installed 100% safety  
cannot be guaranteed and safe working prac-  
tice must be followed at all times. Check your  
R.C.D. every time you use it.  
wet hedge, where feasible.  
3. Know how to stop the Hedgetrimmer quickly  
in an emergency.  
4. Never hold the Hedgetrimmer by the guard.  
5. Never operate the Hedgetrimmer with dam-  
aged guards or without guards in place.  
6. Remove plug from mains before passing  
Hedgetrimmer to another person.  
7. Avoid operating while people especially chil-  
dren are nearby.  
8. Whilst using the Hedgetrimmer always be  
sure of a safe and secure operating position.  
2. Before use, examine cable for damage,  
replace it if there are signs of damage or  
ageing.  
3. Do not use the Hedgetrimmer if the electric  
cables are damaged or worn.  
4. Immediately disconnect from the mains elec-  
tricity supply if the cable is cut, or the insula-  
tion is damaged. Do not touch the electric  
cable until the electrical supply has been dis- 9. Keep hands and feet away from the cutting  
connected. Do not repair a cut or damaged  
cable. Replace it with a new one.  
5. Your electric cable must be uncoiled, coiled  
cables can overheat and reduce the efficien-  
cy of your Hedgetrimmer.  
means at all times and especially when  
switching on the motor.  
10. Do not use stepladders whilst operating the  
Hedgetrimmer.  
11. Remove the plug from the mains :-  
6. Keep cable away from the cutting area.  
7. Never carry the product by the cable.  
8. Never pull on the cable to disconnect any of  
the plugs  
9. Do not pull cable around sharp objects.  
10. Always switch off at the mains before dis-  
connecting any plug, cable connector or  
extension cable.  
11. Switch off, remove plug from mains and  
examine electric supply cable for damage or  
ageing before winding cable for storage. Do  
not repair a damaged cable, replace it with a  
new one. Use only Electrolux Outdoor  
Products replacement cable.  
-
before leaving the Hedgetrimmer unattended  
for any period;  
before clearing a blockage;  
before checking, cleaning or working on the  
appliance;  
if you hit an object. Do not use your  
Hedgetrimmer until you are sure that the  
entire Hedgetrimmer is in a safe operating  
condition;  
if the Hedgetrimmer starts to vibrate abnor-  
mally. Check immediately. Excessive vibra-  
tion can cause injury.  
-
-
-
-
-
before passing to another person.  
Maintenance and storage  
12. Always wind cable carefully, avoiding kink-  
ing.  
13. Use only on AC mains supply voltage shown  
on the product rating label.  
14. Our products are double insulated to  
EN60335. Under no circumstances should  
an earth be connected to any part of the  
product.  
1. Keep all nuts, bolts and screws secure to be  
sure the Hedgetrimmer is in safe working  
condition.  
2. Replace worn or damaged parts for safety.  
3. Be careful during adjustment of the  
Hedgetrimmer to prevent entrapment of the  
fingers between moving blades and fixed  
parts of the machine.  
4. After use the Hedgetrimmer should be  
stored using the blade cover/storage holder  
provided.  
 
3
CABLES  
3. IMPORTANT!  
IMPORTANT  
Use only 1.00mm2 size cable up to 40 metres  
length maximum.  
E
Maximum rating :  
L
RED  
OR  
BROWN  
1.00mm2 size cable, 10 amps 250 volts AC.  
YOUR HEDGETRIMMER IS SUPPLIED  
WITH CABLE WIRED DIRECTLY INTO THE  
PRODUCT.  
F
U
S
BLACK  
E
OR  
N
1. Mains Cables and Extension Cables are avail-  
able from your local Electrolux Outdoor  
Products Approved Service Centre.  
2. Do not wire an extension cable directly to your  
product yourself. Please contact your local  
Electrolux Outdoor Products Approved Service  
Centre for further information on the connec-  
tors and kits available.  
BLUE  
The wires in the mains lead are coloured in  
accordance with the following code:  
BLUE NEUTRAL  
BROWN LIVE  
3. Only use extension cables specifically  
designed for outdoor use.  
CONNECTORS  
-
-
IMPORTANT  
The wire which is coloured BLUE must be  
connected to the Terminal which is marked  
with the letter 'N' or coloured BLACK.  
The wire which is coloured BROWN must be  
connected to the Terminal which is marked  
with the letter 'L' or coloured RED.  
4. It is important that the outer sheath is clamped  
correctly into the 3-pin plug.  
5. If in doubt consult your local Service Repairer  
or qualified electrician before the machine is  
used.  
6. A 13 Amp fuse must be fitted to the Mains  
Plug.  
Connectors are suitable for use with 2 core  
cable only. Under no circumstances should  
these connectors be used for earthed prod-  
ucts.  
All connectors and cables are of splashproof  
construction. They are not waterproof and  
must not be left outside permanently nor  
should they be submerged or immersed in  
water. Do not let cable lay or trail through  
pools of water or splashed with water from  
hose pipes.  
MAINS PLUG REPLACEMENT  
IMPORTANT  
• If the plug supplied is cut off it should be  
destroyed. There is an electric shock haz-  
ard if a cut off plug is inserted into a 13  
amp socket.  
7. The normal plug fuse and household fuse only  
protect the electrical equipment and are not a  
safeguard against electrocution.  
If your product is hard wired i.e. non-  
detachable mains electric cable, a conver-  
sion kit and extension cable is available  
from all Electrolux Outdoor Products  
Approved Service Centres which can be  
found in your local Yellow Pages.  
1. No earth required. Our products are double  
insulated to EN60335 and under no circum-  
stances should an earth be connected to any  
part of the product.  
2. Ensure the mains voltage suits your product  
Assembly  
A
Assembly of Handguard.  
1. Insert Handguard into slot as illustrated in  
figure A, ensuring that it is securely locat-  
ed.  
DO NOT USE THE PRODUCT WITH-  
OUT FITTING THE HANDGUARD  
 
4
Starting and Stopping  
Before starting your Hedgetrimmer.  
B
D
E
C
1. Form a loop in mains cable and push the  
loop through the hole in the handle as  
illustrated in Fig. B.  
2. To secure, position the loop over the hook  
and pull back as illustrated in Fig. C.  
3. Connect to mains and switch on  
4. Remove blade cover/storage holder as  
illustrated in Fig. D.  
To start your Hedgetrimmer  
1. There are two switch levers fitted to your  
Hedgetrimmer.  
2. Both switch levers need to be held in the  
operating position (See Fig E) for the  
product to start.  
F
To stop your Hedgetrimmer  
Move Hedgetrimmer away from cutting  
area before stopping.  
1. To stop, release one of the switch  
levers.(Fig F)  
How to Use  
G
How to Use your Hedgetrimmer  
1. Inspect area to be cut before each use -  
remove objects which can be thrown or  
become entangled in the cutting blades.  
2. Always keep the Hedgetrimmer in front of your  
body. Hold handle firmly with both hands and  
stand in a secure and stable position.  
3. Allow the cutting blades to reach full speed  
before entering the material to be cut.  
4. Always work going away from people and solid objects  
such as walls, large stones, trees, vehicles etc.  
5. If blade stalls, immediately stop the  
Hedgetrimmer. Disconnect the Hedgetrimmer  
from the power source and clear jammed  
debris from the cutting blades. Inspect blades  
and repair or replace as needed.  
H
Top Cutting  
Use a wide sweeping motion. See Fig. G. A  
slight downward tilt of the cutting blades in the  
direction of motion gives the best cutting results.  
Side Cutting  
When trimming the sides of the hedge, begin at the  
bottom and cut upwards (See Fig. H), tapering the  
hedge inward at the top. This shape will expose more  
of the hedge, resulting in more uniformed growth.  
 
5
J
Caring for your Hedgetrimmer  
Cleaning (J)  
1. Using a soft brush - remove debris from all  
air intakes and cutting blade.  
2. Wipe over surface of your hedgetrimmer  
with a dry cloth.  
IMPORTANT  
Never use water for cleaning your hed-  
getrimmer. Do not clean with chemicals,  
including petrol, or solvents - some can  
destroy critical plastic parts.  
K
Lubricating the Cutting Blade  
For easier operation and longer life, lubricate  
the cutter blades before and after use. Apply  
the oil so that it runs between the two blades.  
See Pic K.  
At the end of the Cutting Season.  
1. Clean your Hedgetrimmer thoroughly.  
2. Check that all nuts and bolts are secure.  
3. Visually inspect the Hedgetrimmer for any  
worn or damaged parts, contact your local  
Service Centre if any parts require  
replacement.  
L
To store your Hedgetrimmer  
The Hedgetrimmer blade cover/storage  
holder is provided with 2 hanging slots for  
storing the Hedgetrimmer on the wall.(See  
Pic L)  
Ensure the blade cover/storage holder is  
fitted before storage.  
M
N
1. The use of 2 number 10 screws (40mm in  
length) and the appropriate wall fixing  
plugs is recommended  
2. Drill 2 holes 47mm horizontally apart.  
3. Fit wall plugs.  
4. Fit screw ensuring enough length is avail-  
able for secure location into hanging slot.  
Your mains cable can be stored with the  
blade cover/storage holder fitted. (Pic M &  
N)  
Store in a dry place where your  
Hedgetrimmer is protected from damage.  
 
6
Fault Finding Hints  
Fails to Operate  
1. Is the Power Turned On?  
Fails to stop when one switch lever is released.  
Immediately disconnect from the mains  
electricity supply and consult your local  
approved Service Centre.  
2. Check the fuse in the plug, if blown replace.  
3. Fuse continues to blow?  
Immediately disconnect from the mains  
electricity supply and consult your local  
approved Service Centre.  
Cutting blade stops under load  
1. Cut at a slower pace.  
Poor cut quality  
1. Ensure the product is being used correctly  
(see How to Use)  
2. Ensure blades are free from trapped debris  
3. Damaged Blades?  
2. If cutting blade still stops under load?  
Disconnect from the mains electricity sup-  
ply and consult your local approved  
Service Centre.  
Immediately disconnect from the mains  
electricity supply and consult your local  
approved Service Centre.  
Excessive Vibration  
Immediately disconnect from the mains  
electricity supply and consult your local  
approved Service Centre.  
Environmental Information  
Electrolux Outdoor Products are manufactured  
under an Environmental Management System (ISO  
14001) using, where practical, components manu-  
factured in the most environmentally responsible  
manner, according to company procedures, and  
with the potential for recycling at the end of the  
products’ life.  
• Packaging is recyclable and plastic compo-  
nents have been labelled (where practical) for  
categorised recycling.  
The symbol  
on the product or on its packag-  
ing indicates that this product may not be treated  
as household waste. Instead it shall be handed  
over to the applicable collection point for the  
recycling of electrical and electronic equipment.  
By ensuring this product is disposed of correctly,  
you will help prevent potential negative conse-  
quences for the environment and human health,  
which could otherwise be caused by inappropri-  
ate waste handling of this product.  
• Awareness of the environment must be considered  
when disposing of ‘end-of-life’ product.  
• If necessary, contact your local authority for  
disposal information.  
For more detailed information about recycling of  
this product, please contact your local council  
office, your household waste disposal service or  
the shop where you purchased the product.  
Guarantee & Guarantee Policy  
If any part is found to be defective due to faulty  
manufacture within the guarantee period, Electrolux  
Outdoor Products, through its Authorised Service  
Repairers will effect the repair or replacement to the  
customer free of charge providing:  
(a) The fault is reported directly to the Authorised Repairer.  
(b) Proof of purchase is provided.  
(c) The fault is not caused by misuse, neglect or  
faulty adjustment by the user.  
(d) The failure has not occurred through fair wear and tear.  
(e) The machine has not been serviced or repaired,  
taken apart or tampered with by any person not  
authorised by Electrolux Outdoor Products.  
(f) The machine has not been used for hire.  
(g) The machine is owned by the original purchaser.  
(h) The machine has not been used outside of the  
country for which it was specified.  
Failures not covered by guarantee  
*
*
*
*
Replacing worn or damaged blades  
Failures as a result of not reporting an initial fault.  
Failures as a result of sudden impact.  
Failures as a result of not using the product in  
accordance with the instructions and recommen-  
dations contained in this Operator's Manual.  
Machines used for hire are not covered by this guar-  
antee.  
The following items listed are considered as  
wearing parts and their life is dependent on regu-  
lar maintenance and are, therefore not normally  
subject to a valid warranty claim: Blades, Electric  
Mains cable.  
*
*
*
Caution!  
Electrolux Outdoor Products does not accept lia-  
bility under the warranty for defects caused in  
whole or part, directly or indirectly by the fitting of  
replacement parts or additional parts that are not  
either manufactured or approved by Electrolux  
Outdoor Products, or by the machine having  
been modified in any way  
(i) The machine has not been used commercially.  
*
This guarantee is additional to, and in no way  
diminishes the customers statutory rights.  
Failures due to the following are not covered, there-  
fore it is important that you read the instructions con-  
tained in this Operator's Manual and understand how  
to operate and maintain your machine:  
 
Service Recommendations  
1. We strongly recommend that your product  
is serviced at least every twelve months,  
more often in a professional application.  
take your complete machine including cable  
and any extension cables used.  
A network of specialist dealers can be found in  
2. Always use genuine Electrolux Spare Parts. your local Yellow Pages. To obtain service on  
3. Prepacked spares are available from most  
Electrolux Outdoor Products stockists.  
4. Your product is uniquely identified by a sil-  
ver and black product rating label  
5. If you have a problem with your machine  
contact your local Approved Service Centre  
your product simply telephone or visit your local  
Service Centre. Should you require service  
under the terms of our guarantee the Service  
Centre will require proof of purchase.  
All of the centres listed stock genuine  
Electrolux Spare Parts.  
ensuring you have full details of your product NOTE: Our Service Repairers act on their own  
as described on the product rating label.  
6. Should it be necessary for work to be carried  
out by your Service Centre, it is important to  
behalf and are not empowered to commit or  
legally bind Electrolux Outdoor Products in  
any manner whatsoever.  
Declaration of Conformity  
I, the undersigned M. Bowden of Electrolux  
Outdoor Products, Aycliffe Industrial Park,  
NEWTON AYCLIFFE, Co. Durham. DL5  
6UP. Certify that the product:-  
Category........ Hedgetrimmer  
Make.............. Electrolux Outdoor  
Products  
I, the undersigned M. Bowden of Electrolux  
I, the undersigned M. Bowden of Electrolux  
Outdoor Products, Aycliffe Industrial Park,  
NEWTON AYCLIFFE, Co. Durham. DL5  
6UP Certify that a sample of the above  
product has been tested using ISO 5349 as  
a guide. The maximum weighted root mean  
square value of vibration recorded at opera-  
tor’s hand position was:-  
Outdoor Products, Aycliffe Industrial Park,  
NEWTON AYCLIFFE, Co. Durham. DL5  
6UP Certify that a sample of the above  
product has been tested using directive  
81/1051/EEC as a guide. The maximum A-  
weighted sound pressure level recorded at  
Conforms to the specifications of Directive operator position under free field semi ane-  
choic chamber conditions was :-  
2000/14/EEC  
Identification of Series......See Product Rating Label  
Conformity Assessment Procedure....ANNEX VI  
Notified Body.................... I.T.S., Cleeve Road, Leatherhead,  
Surrey. KT22 7SB England  
Other Directives:-............. 98/37/EEC, 89/336/EEC,  
73/23/EEC  
& applicable standards:-. EN61000-3-2, EN61000-3-3,  
EN55014-1, EN55014-2, EN774, EN50144-1,  
EN50144-2-15  
Type............................................... HT42/HT420 HT45/HT450 HT51/HT510 HT60/HT600  
Blade Length................................. 42cm 45cm 51cm 60cm  
Guaranteed sound power level.. 101 dB (A) 105 dB (A) 101 dB (A) 101 dB (A)  
Measured Sound Power Level...98 dB (A)  
Level............................................... 90 dB (A)  
Value.............................................. 4.04 m/s2  
Weight............................................ 3.2 Kg  
97 dB (A)  
91 dB (A)  
4.6 m/s2  
3.2 kg  
98 dB (A)  
95 dB (A)  
7.5 m/s2  
3.5 kg  
98 dB (A)  
95 dB (A)  
7.5 m/s2  
3.5 kg  
Newton Aycliffe, 16/08/2004  
M. Bowden,  
Research & Development Director  
Electrolux Outdoor Products  
Aycliffe Industrial Park  
NEWTON AYCLIFFE  
Co.Durham DL5 6UP  
ENGLAND  
Telephone - (00) 44 1325 300303 Fax - (00) 44 1325 310339  
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.  
Electrolux Outdoor Products manufacture products for a number of well known brands under various registered patents, designs and  
trademarks in several countries.  
© Electrolux Outdoor Products Ltd. Registered Office, Electrolux Works, Oakley Road, Luton LU4 9QQ  
Registered number 974979 England  
The Electrolux Group. The world’s No.1 choice.  
The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million  
Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold  
each year to a value of approx. USD 14 billion in more than 150 countries around the world.  
5119561-02  
 

Cowon Systems MP3 Player COWON D2 User Manual
Crosley Radio Turntable CR40 User Manual
Curtis MP3 Player CD149 User Manual
Dyson Vacuum Cleaner DC14 User Manual
Electro Voice Portable Speaker S 152 User Manual
ETA Systems Surge Protector ETA ECS3 User Manual
Everpure Water System 7CB5 K User Manual
Everpure Water System DEV9105 41 User Manual
Fisher Price Baby Toy 73761 User Manual
Furman Sound Power Supply PF Pro R User Manual